All About Locksmith Press Today

Oops! How to Retrieve Locked Keys in Your Car without Breaking a Window

Mar 26

Locked Keys in Car? Here's How to Get Your Keys Out

If you’ve ever locked your keys in your car, you know how frustrating and stressful it can be. However, there are steps you can take to get out of this situation as quickly and painlessly as possible.

The first thing you should do is to check if you have spare keys. You can often find these in your car, or at home.

Locked in the Trunk

Getting locked out of your car can be embarrassing, stressful, and even scary. When it comes to the trunk, though, it can be particularly nerve-wracking because it’s one of the most difficult places to get into your vehicle.

The first thing you need to do is not panic. It’s important to remember that a trunk is not airtight and it can become very hot or cold, depending on the weather and what you’re wearing, as well as how much food you’ve eaten and whether you had any burritos for lunch.

Your best option is to try to get out of your trunk as quickly as possible, so you don’t spend too long trapped inside. Once you’ve gotten the panic out of your system, you can begin to think about how you will get out.

There are several ways to unlock your trunk. Some are relatively simple, while others may require some trial and error.

You can also call a local locksmith to help you. This is especially a good idea when you’re stuck out of your car for a significant period of time or if the situation is an emergency.

The locksmith will be able to tell you what to do and can give you a number of options. They can also provide a quote on the cost of unlocking your car and helping you get out.

Another alternative is to call a roadside assistance service like AAA. They can send a technician to unlock your car and give you one free lockout per year.

Once the technician has arrived, he or she will need to break into your trunk. This is an inherently dangerous task, and it can be a lot more complicated than you might think.

If you’re not sure how to proceed, it is a good idea to call your insurance company or your dealership. They can provide you with a list of trusted auto locksmiths in your area and can help you choose the best one.

It is always a good idea to keep a spare key in your car. This can be in case you have a key malfunction and need to get back into your car without using the original keys.

Locked in the Door

A locked car door can be a frustrating thing to experience, especially if you don't have a spare key or have no way of getting into the vehicle. There are a few ways you can get your keys out of the door, including calling a locksmith or doing some DIY hacks that won't cause any damage to your car.

The first step is to figure out how the lock on your vehicle is activated. The button or switch may be on the driver's door, in the center console, or somewhere else. If your car doesn't have an unlock button, you'll need to find a way to manually pull up the locking pin next to the window.

One common method involves using a shoelace and wriggling it through the door's seam. To do this, tie a slip knot in the shoelace and then wiggle it around in a back-and-forth motion that looks like you're flossing a giant tooth.

Another easy method is to use a wire hanger and slide it down between the weather stripping and the window. The end of the hanger should be inside nearly 3 centimeters at the meet of the weather stripping and the window frame, where the control arm usually is.

When you've got the hanger positioned correctly, slide it down between the door frame and the window, and insert it so that its end is angled toward the lock button on the frame. You'll need to fiddle with the wire hanger a little to make it fit, so be patient.

Once the hanger is inserted, grab the lock button with the hook portion of the hanger and push it up until you can open the door. You'll need to do this a few times before you can be sure that the hook has caught onto the locking pin.

You can also try to fashion a tool or hook that will fit around the bottom of the locking pin, then grab it and pull it up. A clothes hanger is a good starting point, but you can use any thin tool that will fit in the gap between your door and the body of your car.

Locked in the Ignition

When you have locked your keys in your car, it can be a frustrating experience. In addition to being an inconvenience, it can also leave you stranded. However, there are some things you can do to try and fix this problem.

One of the most common causes for a key to get stuck in a vehicle's ignition is that it has been misaligned with the pins inside the ignition lock cylinder. This can be caused by debris that has been transferred into the cylinder from a key with foreign material attached to it, or by wear and tear over years of use.

You can check to see if your key is properly aligned with the pins in the ignition by using a small hammer and tapping it very gently. This should loosen or reset the pins that are out of alignment, and allow your key to turn.

Another possibility is that your car's ignition cylinder may have failed and the key has become stuck in it. If this is the case, you'll need to take your car in for repair.

Alternatively, you can pull the key out very slightly before trying to turn it. Sometimes, pulling it out by a sixteenth of an inch is enough to allow the key to turn.

If you still can't turn the key, it's time to call a locksmith to make a replacement. Doing so will ensure that your vehicle isn't prone to these issues in the future, and will save you money on repair costs down the road.

When you get a replacement ignition key, make sure to replace the old one as well. This is an important step in preventing the key from getting stuck again in the ignition and becoming damaged.

Locked in the Keyhole

If you’re on the road and realize your keys are locked in the keyhole of your car, it can be a frustrating experience. However, there are some simple ways to fix this problem and get back into your vehicle.

Firstly, try applying a lubricant inside the lock and on the key. This will make it easier to insert the key and also remove any dirt or rust that may be preventing it from going all the way in.

Another option is to wiggle the key around the tumblers of the lock to loosen them up. This will allow the key to go all the way in, but it’s important not to use excessive force as this could damage the lock or break your key inside of it.

If your key can go all the way in but won’t turn, it might be stuck on a sharp burr or ridge on its teeth. This is usually caused by a new or poor-quality key. If this is the case, you can ask your locksmith to file down these points.

You can also try a specialty tool from your lock kit. These small implements are designed to fit your particular lock type and will slide along the recessed groove of your key as far as it will go. They often have a hook that can grab the tip of your key, but you’ll have to position it correctly in order for it to work.

A long, thin rod can also be used to unlock your car if you have one in the door frame. You’ll need to insert it into the door frame and then use a long, skinny tool (such as a clothes hanger) to manipulate it and push or pull the lock in the direction you want.

Finally, if your key won’t go in all the way but it doesn’t appear to be broken inside of the lock, try using a pair of needle-nose pliers to snag and gently pull on the end of the key. This will release the fragment and you can then take it to a locksmith for replacement.

If you can not do it by yourself and need an emergency in opening a locked car in Edmonton, Alberta then visit our service page and call us to receive an estimate and have a professional service in your place.